陶瓷微凹辊

高精度耐磨陶瓷网纹辊

广泛应用于包装印刷行业中的纸箱水墨印刷机、各种柔版印刷机，电化铝、金银卡、各种复合膜、光学膜、保护膜、锂电池隔膜和碳带行业中的精密涂布机等。

● 圆点辊筒的高精度品质适合设备更高速和高效率的运转。

● 比传统工艺更致密、细腻和坚固耐磨的陶瓷涂层，确保加工成光滑流畅的表面，满足雕刻髙线数网型。

● 更薄的网墙和最佳的开口和深度比例，使单位面积中获得更多的容积。

● 光滑的网孔内壁使网纹辊具有优异的释放和转移性能，获得更多更均匀的转移层。

● 精确的网型精度和均匀一致的网孔容积，实现精确可控的油墨或涂布液的转移量。

● 多种网型的选择可以满足不同条件下不同转移量的需求。

High-precision Wear-resistant Ceramic Anilox Roll

It is widely used in carton printing machines, flexo printing machines, and high-precision coating machines ofanodized aluminum, gold and silver card, composite film, optical film, protective film, lithium battery separator and ribbon industries.

The high-precision roll is suitable for the operation of the equipment with high speed and high efficiency.

The ceramic coating is more denser, better and wear-resistant than traditional coating, which can ensure high screen line engraving and smoother surface.

The thinner cell wall and the best ratio of pitch and depth can get more volume in unit area.

The smoother cell wall ensure the roll gets a excellent release and transfer performance,which means more thicker and uniform layer.

The accurate cell shape and the same cell volume makes it easier to control the transfer volume of ink or coating medium.

The diversified selections of cell shapes can meet the needs of different transfer requirements under different conditions.

产品规格

辊面有效雕刻直径:φ50～600mm

辊面有效雕刻长度:L100～5800mm

雕刻线数:50～2000  L/in   ( 20～800 L/cm )

Roll Specification

Roll Diameter:   φ50～600mm

Surface Length:  L100～5800mm

Screen Line:     50～2000  L/in   ( 20～800 L/cm )

网型

网孔形状：六角型、四方型的凹点和凸点、斜纹型和其它特定设计网型

网孔排列角度：60°、45°、30°及其他特定需求，斜纹1～89°

Cell Specification

Cell Shape: Hexagon, Diamond, Tri-helical and other special shapes

Cell Angle: 60°、45°、30°and other special requirements，Tri-heliacal 1～89°

品质精度

圆跳动：0.005～0.01 mm

圆柱度：0.01 mm

动平衡品质级别：G2.5

Quality Precision

CylinderRunout: 0.005~0.01 mm 

Cylindricity: 0.01 mm 

Dynamic Balance Quality Level: G2.5

卓越的耐磨陶瓷涂层性能

● 防腐底层镍铬涂层

● 专用纯氧化铬（Cr2O3）表层

● 专用陶瓷封孔剂再度防护

● 孔隙率：1～3% （可雕刻2000 L/in网孔）

● 涂层硬度：HV0.3≥1250

● 结合强度：40—60Mpa

Excellent Performance Of Wear-resistant Ceramic Coating

The Anticorrosion Nickel-chrome Powder Undercoating

The Special Cr2O3 Powder coating

The Special Ceramic Sealant Re-protection

Porosity: 1～3% （which can engrave 2000 L/in）

Coating Hardness:  HV0.3≥1250

Coating Strength:  40—60Mpa

网纹容积的选择

合适的网纹容积的选择，是根据设备的不同性能（匀刮方式、工作精度和运行速度等）、油墨或涂布液的特性、不同吸墨或涂布液性能的承印材料和柔印版面上图文形式所需要的不同墨量或涂布量而决定，再参照《网纹辊网孔几何参数和容积表》，选择合适的网纹规格。可按特殊需求设计定制相应的不同形状和转移量的网型。

Selection OfAnilox Volume

The right choice of anilox volume is according to the different performance of your machines(including the scraping method, the working accuracy, theworking speed, etc),the specification of the ink or coating medium, the different substrate materials and the demands of ink or coating medium. Then refer to the form of anilox cell geometry and volume,we can choose the appropriate cell specification.

We can also engrave the different cell shapes with different transfer volume to meet the needs of special requirements.